Battery Charging Discharging Testing Machine
The charging discharging testing process of lithium batteries is a crucial step in evaluating battery capacity and performance, carrying significant importance.
Charging discharging testing, involving charging and discharging processes, determines the battery’s capacity, i.e., the amount of electrical energy the battery can store and release.
Our Battery Charging Discharging Testing Machine
★ BTS-5V6A
Specification
Communication Method | TCP/IP (network port) |
Channel Control Mode | Single point independent control |
Charging Energy Efficiency | 80% |
Current | 0-6000ma |
Charging Voltage | 0-5V |
Discharge Port Voltage | 5-1.5V |
Discharge Feedback Efficiency | 75% |
Voltage Accuracy | ±(0.05%RD+0.05%FS) |
Current Accuracy | ±(0.05%RD+0.05%FS) |
Main Temperature | According to the specific equipment, each channel can be customized and equipped with 1 channel. |
Voltage Resolution | 1mV |
Current Resolution | 1mA |
Temperature Resolution | 0.1℃ |
Input Power | AC220N±10%/50Hz (cabinet power supply mode: three-phase five-wire) |
Sampling Time | Single box sampling frequency: 10mS |
Recording Time | 100mS~65535S |
Charging Mode | Constant current and voltage limiting, constant current and constant voltage, constant power charging, constant current overcharge test, constant resistance charging, constant resistance charging (for batteries with protective plates) |
Charging Cutoff Conditions | Voltage, current, time, capacity, temperature |
Discharge Mode | Constant current discharge, constant power discharge, constant current over-discharge test, constant resistance discharge, constant resistance discharge (for batteries with protective plates) |
Discharge Cutoff Conditions | Voltage, current, time, capacity, temperature |
Single Cycle Steps | 100 steps, with nested loop function (10 levels) |
Circuit Structure | Modular structure design for easy replacement and maintenance |
Software and Hardware Protection | Reverse connection protection, overvoltage protection, overcurrent protection, overtemperature protection, undervoltage protection, short circuit protection |
★ SC-S13-512/6
1. Brief Introduction
This product is used for formation, capacity grading, and performance parameter testing of lithium batteries. It is a master-slave battery comprehensive testing system composed of a computer and equipment microcontroller.
The structure is advanced, performance is reliable, operation is convenient, and efficiency is high. It has a very high cost-performance ratio and is an essential production testing equipment for lithium battery manufacturers, capacity grading manufacturers, and research institutions.
2. Structure and Appearance of the Equipment
The structure of this equipment is mainly composed of the following parts:
(1) One CPU board, centrally controlling the entire cabinet.
(2) 64 constant current boards for eight channels, evenly arranged in four sections.
(3) 32 charging switch power supplies for two groups of outputs, each supplying power to 2 constant current boards.
(4) Two keyboard boards, allowing dual-sided operation.
(5) 32 sets of quick clamps, each set with 16 channels, equipped with 32 plastic battery trays. Each battery tray can simultaneously accommodate batteries of sizes such as 18650, 21700, 26650, 32650, and 32700.
3. System Structure and Operation Principles
(1) System Components
① Lithium battery formation and grading equipment (1-10 units).
② One computer with a USB interface (to be provided by the user).
③ A USB to RS485 interface converter and communication cable.
④ A set of SC product software.
(2) Operation Principles
① The equipment is controlled through a computer for sending commands and collecting data.
② The keyboard allows manual operation of the equipment, displaying parameters and status.
③ The constant current boards, commanded by the CPU, function in constant current and constant voltage modes.
4. Main technical parameters
Equipment structure | |
Number of device channels | The whole machine has 512 channels in total |
Dimensions | Width 1620mm X Depth 550mm X Height 1840mm |
Chassis color | Standard off-white (can be customized) |
Fixture form | Quick clamp four-wire clamp (pointed head, flat head, two pieces) optional, equipped with battery tray |
Fixture spacing | 35mm |
Support battery specifications | 18650, 26650, 21700, 32650, 32700 |
Working power supply | Three-phase five-wire system AC380V±10%,50HZ |
Operating power consumption | ≤27KW |
working environment | Temperature -10~40℃, relative humidity ≤80% |
Heat dissipation method | Natural air intake, upward exhaust |
Channel parameters | |
Voltage measurement range | DC 0~5V |
Battery voltage range | Charging DC0~4.5V; discharging DC4.5~2V |
Constant voltage range | DC 2.5~4.5V |
Voltage accuracy | ±(1‰ reading +1% full scale) |
Voltage resolution | Resolution 1mV |
Voltage stability | ≤1‰ |
Current range | Charging DC 60mA~6A; discharging DC 60mA~6A |
Current accuracy | ±(1% of reading +1%‰full scale) |
Current resolution | Resolution 1mA |
Current stable reading | ≤1‰ |
Software function | |
Control method | Computer control equipment work, whole cabinet control |
Communication method | Serial port, baud rate 57600 |
Process settings | Up to 32 work steps and 256 cycles can be set, with nested cycle function |
Charging mode | Constant current, constant voltage, constant current and constant voltage |
Charge cutoff conditions | Voltage, current, time, capacity |
Discharge mode | Constant current |
Discharge cutoff conditions | Voltage, time, capacity |
Protective function | Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power-off protection, data breakpoint recovery |
Time limit | 0~30000 minutes/step, time unit is min |
Time precision | ≤±1‰ |
Sampling inspection cycle | ≤8s |
Minimum data logging frequency | ≤8s |
Battery sorting | Sort by (capacity, time, open circuit voltage, discharge platform, etc.) |
Data processing | It can record voltage, current, time, capacity and other data, and automatically calculate constant current charging ratio, capacity loss, |
5. Product Features
(1) Each battery has a completely independent constant current and constant voltage source, stable and without impact.
(2) The equipment is controlled by an AVR microcontroller, connected to a computer, capable of saving all test data and curves. It can also be operated directly through the equipment’s keyboard to set up processes, complete tests, and perform sorting.
(3) Real-time detection and display of the status of each battery, with the ability to stop the operation of a channel and illuminate indicator lights in case of anomalies.
(4) Equipped with power-off protection, allowing the original work process to continue running after power is restored.
(5) Power tubes use field-effect transistors, suitable for batteries with lower discharge voltage, such as lithium iron phosphate batteries.
(6) Utilizes a graphical user interface, intuitive and clear, simultaneously displaying data such as voltage, current, time, and capacity for each battery. It can also be configured to show different colors for corresponding operational states and abnormal conditions.
(7) It is recommended that users equip each computer with a UPS power supply to prevent damage to the computer or data during power outages. Each computer can connect to a maximum of 10 devices to avoid affecting computer operation.
6. Product accessories
No. | Name | Quantity |
1 | Equipment factory inspection report | 1 set/unit |
2 | Equipment instruction manual | 1 set |
3 | Packing list and product certificate | 1 set/unit |
4 | Communication line | 1 set/unit |
5 | Product software U disk | 1 set |
7. Service and support
(1) One-year warranty with free maintenance, upgrades, and training during the first year.
(2) Within the warranty period, on-site repair services will be provided within 48 hours, with special circumstances subject to negotiation.
(3) After the warranty period, maintenance will only incur raw material costs, and software upgrades will be provided free of charge.
8. Packaging, Transport, Storage
(1) Packaging: The packaging box includes product name, model, labels, quality certificate, and manufacturing date.
(2) Transport: The packaging is suitable for transportation by car, ship, plane, train, etc. The transportation process includes rain and shock protection, and civilized loading and unloading.
(3) Storage: When storing the product, it should be well-packaged to prevent moisture and corrosion. It should also be kept off the ground to prevent water contact. If stored for more than 1 year, it should be re-inspected by a professional before use.
Here are several reasons why the charging discharging testing process is important:
Determining Battery State
Through capacity testing, the actual capacity of the battery can be determined, providing insights into the current state and performance level of the battery. This is crucial to ensure that the battery can deliver sufficient electrical energy during usage.
Quality Control
During the production process, capacity testing is employed to detect the quality and consistency of batteries. This helps identify any potential manufacturing defects or faulty batteries, ensuring that products delivered to the market maintain consistent performance levels.
Fault Diagnosis
In the event of issues with battery components, capacity testing can be utilized for diagnosing problems and determining whether the issue lies in a decrease in battery capacity or other faults. This aids in accurate troubleshooting and maintenance.
Battery Life Management
Regular capacity testing allows for monitoring the battery’s degradation process, identifying a decrease in battery capacity, and proactively preventing potential faults. This contributes to effectively managing the battery’s lifespan and facilitating timely maintenance or replacement when needed.
Performance Assessment
Capacity testing provides a detailed assessment of battery performance, offering information on charging and discharging efficiency, cycle life, and other aspects. This is crucial for establishing performance requirements for devices and systems utilizing the battery.
In summary, the capacity testing process is crucial for ensuring the reliability, performance, and lifespan of the battery. It plays a critical role not only in production and quality control but also helps users effectively manage and maintain their battery components.